IGAP-820+
Industrial IEEE 802.11 ac/g/n wireless access point with 2x10/100/1000Base-T(X)
Overview IGAP-820 series is a reliable WLAN Access Point with 2 Ethernet Gigabit ports and IEEE 802.11 ac/g/n wireless module. It can be configured to operate in AP/Client mode. You are able to configure IGAP-820 / IGAP-820+ by WEB interface via LAN port or WLAN interface. IGAP-820 series provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. In addition, IGAP-820+ also provides P.D. feature on ETH2 port which is fully compliant with IEEE802.3af PoE P.D. specification.
|
|
Features
- IEEE 802.11 ac/g/n WLAN interface support up to 1,3 Gbps link speed
- Support X-Roaming < 60 ms
- Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
- Support AP/Bridge/Repeater/AP-Client Mode
- Support Multiple SSID
- Secured Management by HTTPS
- Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
- Rigid IP-30 housing design
- DIN-Rail and panel mounting enabled
|
Interfaces
- 2 x 10/100/1000Base-T(X) Ports in RJ45
- 1x 802.11 ac/g/n
Antenna and connector: 2dBi antenna on reverse SMA connector
Frequency Band America/FCC : 2.412~2.462 GHz (11 channels) Europe CE/ETSI : 2.412~2.472 GHz (13 channels)
Transmission Rate IEEE802.11ac : up to 1,3 Gbps IEEE802.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps IEEE802.11n : up to 300 Mbps
|
Power - Redundant Input Power: Dual DC inputs. 12-48VDC on 6-pin terminal block. PoE PD support in eth1 - Power Consumption (Typ.) 7,5 Watts - Overload Current Protection Present
Environmental Operating Temperature -25 to 70°C Operating Humidity 5% to 95% Non-condensing
Warranty 5 years
|