Leading Edge Networking Solutions


Industrial 6-port slim type unmanaged Gigabit PoE Ethernet switch with 4x10/100/1000Base-T(X) P.S.E. and 1x10/100/1000Base-T(X) and 1x1000Base-X, SFP socket, 24VDC power inputs

IGPS-1411GTP-24V is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1411GTP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1411GTP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, 1 additional Gigabit port, and 1x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1411GTP-24V supports wide range 12~36VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup.



  • IGPS-1411GTP-24V provide 4x10/100/1000Base-T(X) PoE (P.S.E.) ports
  • Support P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
  • SFP port support 100Base-FX and 1000Base-X speed
  • Support auto-negotiation and auto-MDI/MDI-X
  • Support store and forward transmission
  • Support dual wide range 12~36VDC power inputs for power redundancy
  • Supports flow control
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled


  • 4 x 10/100/1000Base-T(X) PSE
  • 1x 10/100/1000BaseTX Ports in RJ45 Auto MDI/MDIX
  • 1x 100/1000Base-X SFP port
Redundant Input Power Dual DC inputs. 12-36 VDC on 6-pin terminal block
Power Consumption (Typ.):6,5 Watts (power device not included)
Overload Current Protection Present

Operating Temperature -40 to 60°C
Operating Humidity 5% to 95% Non-condensing

Physical Characteristics
Dimensions (mm): 41 (W) x 94.9 (D) x 144.3(H)
Enclosure: IP30

Warranty 5 years


DR-75-48 75W DIN-Rail power supply
DR-120-48 120W DIN-Rail power supply

SFP100 series - 100Mbps SFP optical transceiver
SFP1G series - 1Gbps SFP optical transceiver