Leading Edge Networking Solutions


Industrial Slim Type 8 port PoE Unmanaged Ethernet Switch


IGPS-1080A is unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080A switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

IGPS-1080A can be used in connecting several PoE P.D. Ethernet devices like IP-Camera or other Ethernet devices. In addition, there are two different power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation.

  Switch IGPS-1080A  Features
  • Supports P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
  • Dual redundant DC power inputs at terminal block
  • Support Jumbo Frame up to 9K Bytes
  • Very wide operating temperature range from -40 to 70°C
  • Rigid IP-30 housing design
  • DIN-Rail and panel mounting enabled
  • 8 x 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX

Redundant Input Power Dual DC inputs. 50-57 VDC on 6-pin terminal block
Power Consumption (Typ.): 8 Watts (power device not included)
Overload Current Protection Present

Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing

Physical Characteristics
Dimensions (mm): 26,1(W) x 94,9(D) x 144,3(H)
Enclosure: IP30

Warranty 5 years


NDR-75-48 75W DIN-Rail power supply
NDR-120-48 120W DIN-Rail power supply

NDR-240-48 240W DIN Rail power supply