SE5901B

3G/4G LTE Cellular to Ethernet and Serial Secure Industrial Gateway

Overview
SE5901B, Industrial Serial to Ethernet and Cellular Gateway is a high-performance, cost effective gateway for serial signal communications; allowing almost any serial device to be connected to Ethernet network and providing connectivity to the world. Its powerful CPU provides up to 37.9Mbps software-assisted AES encryption for protecting your data flow through the Internet with a secure IPsec VPN tunnel.

Advanced features available
Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web Browser, Serial Console, or our Windows Utility. Virtual COM software provides a virtual environment for applications when accessing SE5901B through TCP. A dedicated I/O version provides 2 Digital Inputs and 2 Digital Outputs, GPS version provides Global positioning system geolocation and, specifically for the Internet of Things, a “B” version provides additional 15 seconds power during a power failure, allowing the device to relay back to the host the failure. This is Maintenance 4.0.

SE5901B embeds high EMC protection, wide temperature operation, programming and installation flexibility in one device.

• GSM/ GPRS/ EDGE/ UMTS/ HSPA+/ SCDMA/ LTE
• Extensive 3G and LTE Band Support
  - EU: 2100/1800/850/2600/900/800MHz (B1/B3/B5/B7/B8/B20) - US: 1900/1700/850/700MHz (B2/B4/B5/B12/B17)
  
• High-performance IPsec VPN throughput, data-rate up to 37.9Mbps
• Wide temperature, industrial grade platform
• 1 x 10/100/1000Mbps Ethernet port
• 1-port RS-232/485, baud rate up to 921.6 Kbps
• 1-Port USB2.0 high speed OTG + 1-Port USB Power only
• TCP Server/Client, UDP, Virtual COM supported
• 2 Digital Inputs/ 2 Digital outputs in I/O version
• Additional embedded power-bank for fault-relay capability (B version)
• Configuration: Embedded Web-Server (Web UI), TELNET, Device Management Utility
• IPv4, Dynamic DNS, DHCP Client, ICMP, TCP, UDP, HTTP, RFC2217, TELNET

Datarate

Power
- Redundant Input Power:  9-48VDC on 3-pin terminal block -- USB Power Input
- Power Consumption (Typ.) 7,2 Watts
- Overload Current Protection Present

Environmental
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing

IP30 Metal housing

Warranty 5 years

SE5901B-D3G   - EU and US versions

SE5901B-D4G - EU and US versions

• 1x 10/100/1000TX
• 1x RS232/422/485 (DB9M)
• 1x 3G (Internal SIM card slot)
  
• 2 x USB A Type (USB 2.0) - 1-port High-Speed OTG + 1-port power only

• 1x 10/100/1000TX
• 1x RS232/422/485 (DB9M)
• 1x 4G (Internal SIM card slot)
  
• 2 x USB A Type (USB 2.0) - 1-port High-Speed OTG + 1-port power only

SE5901B-IO-D3G

• 2x Digital Inputs DIs - 2 channels photo coupled isolated digital input
  
• 2x Digital Outputs DOs - 2 channels digital output. N.O. (2A @ 24VDC)
  

SE5901B-IO-D4G

• 2x Digital Inputs DIs - 2 channels photo coupled isolated digital input
  
• 2x Digital Outputs DOs - 2 channels digital output. N.O. (2A @ 24VDC)

SE5901B-IO-D3G-GPS 

• 2x Digital I/O + GPS

SE5901B-IO-D4G-GPS

• 2x Digital I/O + GPS

SE5901B-IO-3G-GPS-B

• 2x Digital I/O + GPS + Battery

SE5901B-IO-4G-GPS-B

• 2x Digital I/O + GPS + Battery