ALIDEX
Leading Edge Networking Solutions
 

INJ-102GT series

Industrial 2-port Gigabit High Power PoE Injector

Overview

The INJ-102GT / INJ-102GT-24V PoE Injector is an advanced IEEE802.3at compliant device with Intelligent Detection, that provided 2-ports 10/100/1000Base-T(X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this intelligent detection, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-102GT PoE Injector. Typically in gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 12~57V insertion, the installer doesn’t need to worry about voltage drops caused by cable length. The INJ-102GT series PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.

INJ 102GTplusplus Features
  • Supports 2x10/100/1000 Base-T(X) for power and data Output
  • Fully compliant with IEEE802.3at/802.3af
  • Auto protection for Over Voltage Power Input and over current output
  • Supports Power Output up to 30Watts
  • Supports Power Input range 50Vdc - 57Vdc and 12-57Vdc
  • IP30 Rugged Case Design
  •  DIN Rail & Wall mounting enabled
INJ-102GT INJ-102GT-24V

Power
- Input Power: 50 ~ 57 VDC voltage power input on 4 pin terminal block

- Short Circuit Protection Present
- Overload Current Protection Present

- PoE Output Power: 30Watts per port

Power
- Input Power: 12~57VDC voltage power input on 4 pin terminal block

- Short Circuit Protection Present
- Overload Current Protection Present

- PoE Output Power: 30 Watts per port

Environmental
Operating Temperature -20 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Enclosure: IP30
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1

Warranty 5 years

  Accessories
  DR-75 series, 75W DIN-Rail power supply
DR-120 series, 120W DIN-Rail power supply