IGAP-W612H+

Industrial outdoor IEEE 802.11 a/b/g/n wireless access point with 10/100/1000Base-T(X) PoE P.D., IP-67 grade

Overview
IGAP-W612H+ is a reliable IP-67 outdoor IEEE 802.11 a/b/g/n WLAN Access Point with 1 PoE P.D. Ethernet port.  It can be configured to operate in AP/Client/Repeater mode.  Specifically designed for the toughest industrial environments, with a waterproof, dust-tight protection and high power output of 27 dBm to satisfy far distance connection. IGAP-W612H+ provides two N-type connectors, which can install any N-type antennas to extend communication distance.  You are able to configure by WEB interface via LAN port or WLAN interface.  In addition, IGAP-W612H+ also provides IEEE802.3at PoE P.D. port to save the layout cost of the power line.  IGAP-W612H+ can be easily adopted all kinds of applications and provides the most rugged solutions for managing your network in outdoor.

Features

• High-Speed Air Connectivity: Dual Band in IEEE 802.11 a/b/g/n and b/g/n WLAN interface selectable and support up to 300Mbps link speed
  
• High throughput > 180Mbps with HT40 2x2 MIMO. High transmission power (27 dBm)
  
• Support X-Roaming < 100 ms
• Highly Secure: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X  Authentication supported
• Support AP/Repeater/AP-Client Mode
• Support Multiple SSID
• Secured Management by HTTPS
• Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
• Rigid IP-67 housing design
• Pole mounting enabled

Interfaces

• 1x wifi 802.11 a/b/g/n
• 1 x 10/100/1000Base-T(X) Port in RJ45

Antenna and connector: 2 x External N-type antenna connector

Frequency Band
America/FCC : 2.412~2.462 GHz (11 channels)
Europe CE/ETSI : 2.412~2.472 GHz (13 channels)

Transmission Rate
IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps
IEEE802.11a/g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps

IEEE 802.11n: up to 300Mb

Power
- Input Power: 48VDC from P.o.E
- Power Consumption (Typ.) 9 Watts

Dimension: 220.42(W)x 127.42(D)x 75(H)mm

Warranty 5 years