Leading Edge Networking Solutions

IGAP-620 / 620+

Industrial IEEE 802.11 a/b/g/n wireless access point with 2x10/100/1000 Base-T(X)

IGAP-620 is a reliable WLAN Access Point with 2 Ethernet Gigabit ports and IEEE 802.11 a/b/g/n wireless modules. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IGAP-620 by WEB interface via LAN port or WLAN interface. IGAP-620 provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. In addition, IGAP-620 series also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification.

   IGAP 620


  • High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed
  • Support X-Roaming < 60 ms
  • Support Wireless Load Balancing
  • Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X     Authentication supported
  • Support AP/Bridge/Repeater/AP-Client Mode
  • Support Multiple SSID
  • Secured Management by HTTPS
  • Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
  • Rigid IP-30 housing design
  • DIN-Rail and panel mounting enabled
IGAP-620 / IGAP-620+


  • 1x 802.11 a/b/g/n
  • 2 x 10/100/1000Base-T(X) Ports in RJ45
  • 4x DI/DO in 5pin TB

Antenna and connector: 2dBi antenna on reverse SMA connector

Frequency Band
America/FCC : 2.412~2.462 GHz (11 channels)
Europe CE/ETSI : 2.412~2.472 GHz (13 channels)

Transmission Rate
IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps
IEEE802.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
IEEE802.11n : up to 300 Mbps

- Redundant Input Power: Dual DC inputs. 12-48VDC on 6-pin terminal block. PoE PD support in eth1 IGAP-620+
- Power Consumption (Typ.) 7,5 Watts
- Overload Current Protection Present

- Relay Output

Operating Temperature -10 to 60°C
Operating Humidity 5% to 95% Non-condensing

Warranty 5 years


DR-45 series, 45W DIN-Rail power supply