Leading Edge Networking Solutions


Industrial 6-port slim type unmanaged Gigabit PoE Ethernet switch with 4x10/100/1000Base-T(X) P.S.E. and 2x100/1000Base-X, SFP socket, 24VDC power input

IGPS-1042GP-24V is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GP-24V supports wide range 24~36VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment.


• IGPS-1042GPA provide 4x10/100/1000Base-T(X) PoE (P.S.E.) ports
• Support P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
• SFP port support 100Base-FX and 1000Base-X speed
• Support auto-negotiation and auto-MDI/MDI-X
• Support store and forward transmission
• Advanced PoE power boost technology to support dual 24VDC power inputs
• Supports flow control
• Rigid IP-30 housing design
• DIN-Rail and wall mounting enabled

4 x 10/100/1000Base-T(X) PSE + 2x100/1000Base-X SFP port

Redundant Input Power Dual DC inputs. 24-36 VDC on 6-pin terminal block
Power Consumption (Typ.):6,5 Watts (power device not included)
Overload Current Protection Present

Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing

Physical Characteristics
Dimensions (mm): 41(W)x94,9(D)x144,3(H)
Enclosure: IP30

Warranty 5 years

DR-75-24 75W DIN-Rail power supply

SFP100 series - 100Mbps SFP optical transceiver
SFP1G series - 1Gbps SFP optical transceiver