Leading Edge Networking Solutions


Industrial EN50155 IEEE 802.11 ac/g/n wireless access point with 2x10/100/1000Base-T(X), M12 connector

ORing’s TransporterTMseries access point is designed for industrial and rolling stock wireless applications, such as vehicle, and railway applications. TGAP-820-M12 is a 802.11 ac/g/n WLAN Access Point with 2 Ethernet 10/100/1000 ports. It can be configured to operate in AP/Client Mode. TGAP-820-M12 provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. TGAP-820-M12 provides a dust-tight connection and reverses SMA-type connectors that can install any reverse SMA-type antennas to extend communication distance.  It is specifically designed for the toughest industrial environments.  You are able to configure TGAP-820-M12 by WEB interface via LAN port or WLAN interface.   TGAP-820-M12 can be easily adopted in almost all kinds of applications and provides the most rugged solutions for managing your network in outdoor. In addition, TGAP-820+-M12 also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification.


• EN50155-compliant wireless access point for rolling stock application
• High Speed Air Connectivity: WLAN interface support up to 1,3 Gbps link speed
• Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/WPA2/WPA2 - PSK(TKIP,AES)/802.1X Authentication
• Support X-Roaming < 60ms; Support wireless load balance
• Support Multiple-SSID to 4 SSID with QoS
• Dual Gigabit Ethernet ports support redundant mode (Recovery time < 10ms) and switch mode in M12 connector
• Secured Management by HTTPS
• Event Warning by Syslog, Email, SNMP Trap, and Relay output
• Rigid IP-40 housing; wall mounting
• 1KV isolation for PoE P.D. port for TGAP-820+-M12

1x WIFI 802.11 ac/g/n
2x 10/100/1000TX (M12) ports
2x DIDO (M12) ports
1x RS232 Console (M12) port
1x Relay Output (M12) port

- Redundant Input Power: Dual DC inputs. 12-48VDC on 5-pin M23 /// PoE PD in model TGAP-820+-M12
- Power Consumption (Typ.) 8 Watts
- Overload Current Protection Present

125.6(W) x 65(D) x 196.1(H) mm

Operating Temperature -25 to 70°C
Operating Humidity 5% to 95% Non-condensing

Warranty 5 years

DR-75 series, 75W DIN-Rail power supply
DR-120 series, 120W DIN-Rail power supply
DR-45 series, 45W DIN-Rail power supply