ORING IGPS-7084GP

IGPS-7084GP

Industrial Type 12 port Managed Ethernet Switch

Overview
IGPS-7084GP is full Gigabit Managed Redundant Ring PoE Ethernet switch with 8x10/100/1000Base-T(X) ports with PoE (P.S.E.) function and 4x1000Base-X SFP ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 20ms over 250 units of connection) and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.

ORing’s thunder switch series provide advanced IP-based bandwidth management which can limit the maximum bandwidth for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth. ORing’s thunder switch series also support application-based QoS. Application-based QoS can set highest priority for data stream according to TCP/UDP port number. ORing’s special IP police function can permit only allowed IP address with MAC address to access the networking. Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR and controllers. ORing’s thunder series switch also provided advanced DOS/DDOS auto prevention. If there is any IP fl ow become big in short time, ORing’s thunder switch will lock the source IP address for certain time to prevent the attack. It’s hardware based prevention so it can prevent DOS/DDOS attack immediately and completely. IGPS-7084GP also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-7084GP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And all functions of IGPS-7084GP can also be managed centralized and convenient by Open-Vision 3.0

Features

• 24 Gbps Switch bandwidth and 7?s latency
• Supports SNTP and PTP Client for clock synchronization
• IGMP v2/v3 (IGMP snooping support)
• Port Trunking for easy of bandwidth management
• SNMP v1/v2c/v3 support; RMON for traffic monitoring
• Event notification through Syslog, Email, SNMP trap
• Windows Open-Vision support centralized management; configurable by Web,Telnet, Console, CLI
• Dual DC inputs
• Rigid IP-30 housing; DIN-Rail and wall mounting

IGPS-7084GCP
8 x 10/100/1000Base-TX with P.S.E ports
4 x 1000BaseX SFP ports

Power
- Redundant Input Power: Dual DC inputs. 50-57VDC on 6-pin terminal block
- Power Consumption (Typ.) 20 Watts
- Overload Current Protection Present

Environmental
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing

Warranty 5 years

Accessories
DR-7548 series, 75W DIN-Rail power supply
DR-12048 series, 120W DIN-Rail power supply
Open-Vision M500, Network Management Windows
SFP1G series 1Gbps SFP optical transceiver