Leading Edge Networking Solutions

IAP-420 / 420+

Industrial IEEE 802.11 b/g/n wireless access point

IAP-420 / IAP-420+ series are reliable 802.11 b/g/n WLAN Access Point with 2 ports LAN. It supports 802.1X and MAC filters for security control. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-420 / IAP-420+ series by WEB interface via LAN port or WLAN interface. In addition, IAP-420+ also provides P.D. feature on ETH1 which is fully compliant with IEEE802.3af PoE P.D. specification.

IAP 420

• High Speed Air Connectivity: WLAN interface support up to 150Mbps link speed
• Support X-Roaming < 100 ms
• Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X     Authentication supported
• Support AP/Bridge/Repeater/AP-Client Mode
• Support Multiple SSID
• Secured Management by HTTPS
• Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
• Rigid IP-30 housing design
• DIN-Rail and panel mounting enabled

IAP-420 / IAP-420+
2 x 10/100Base-T(X) Ports in RJ45

Antenna and connector: 2dBi antenna on reverse SMA connector

Frequency Band
America/FCC : 2.412~2.462 GHz (11 channels)
Europe CE/ETSI : 2.412~2.472 GHz (13 channels)

Transmission Rate
IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps
IEEE802.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps

Transmit Power IEEE802.11b/g : 20dBm Max

- Redundant Input Power: Dual DC inputs. 12-48VDC on 6-pin terminal block. PoE PD support in eth1 IAP-420+
- Power Consumption (Typ.) 6 Watts
- Overload Current Protection Present

Operating Temperature -10 to 60°C
Operating Humidity 5% to 95% Non-condensing

Warranty 5 years

DR-45 series, 45W DIN-Rail power supply